Programmazione manuale
telecomando
FIAT SCUDO
N.B. NON FORNIAMO ASSISTENZA A PRIVATI!
Accendere il quadro ed aspettare 5 secondi (o che la luce del code si spenga) |
Entro 5 secondi premere tasto CHIUDI poi APRI (Ripetere per tutti i radiocomandi da programmare) |
Spegnere il quadro e provare il radiocomando fuori dal veicolo. |
FIAT ULISSE
PROGRAMMING PROCEDURE
CENTRAL DOOR LOCK (1 BUTTON KEY)
- 1. Ensure all doors are UNLOCKED using the key.
- 2. PRESS and HOLD remote transmitter key button until LED stops flashing.
- 3. After releasing button, LED will light constantly.
- 4. PRESS the remote transmitter button ONCE, and LED will extinguish.
- 5. OPEN the door and HOLD the remote transmitter key near the Ignition switch, and PRESS the remote transmitter button one time.
- 6. Now switch the ignition ON, and wait 10 seconds then turn ignition OFF.
- 7. After 5 seconds, remote transmitter should now operate.
CENTRAL DOOR LOCK with DEADLOCKING (2 BUTTON KEY)
- 1. Ensure all doors are UNLOCKED using the key.
- 2. PRESS and HOLD the large remote transmitter key button while the LED flashes for 20 seconds.
- 3. After 20 seconds PRESS the small deadlock button ONCE while still holding the large button.
- 4. The LED will stop flashing.
- 5. Release the large button and the LED will light constantly.
- 6. PRESS the large button ONE time, and the LED will go out.
- 7. OPEN the door and HOLD the remote transmitter key near the Ignition switch, and PRESS the LARGE remote transmitter button one time.
- 8. Now turn the ignition ON, and wait 10 seconds then turn ignition OFF.
- 9. After 5 seconds, remote transmitter should now operate.
|
